Modern procurement of drawing parts
Metal Fabrication for Custom Metal Parts
FACTUREE handles the metal fabrication of your metal parts for machinery and equipment, from the drawing to the ready-to-install component. Over 2,000 certified manufacturing partners, all fabrication processes, and over 300 materials—with a single point of contact from inquiry through delivery.
Material Certificates 3.1 in accordance with EN 102042 | Traceability
Industry Certifications About Partners: ISO 13485 | EN 9100 | IATF 16949
Why You Should Have Metal Parts Manufactured by FACTUREE
With FACTUREE, you can have metal parts manufactured—whether as single pieces, small batches, or in series. As an ISO-certified metal fabrication service provider, FACTUREE complements the manufacturing capabilities of metalworking companies when they lack capacity, machinery, or processes.
Instead of sourcing metal parts from multiple suppliers and following up with phone calls, simply submit a request. FACTUREE coordinates the production of your metal parts as if it were a single manufacturer, freeing up your procurement team to focus on strategic tasks.
Your advantages at a glance:
- Contractual partner with full liability: FACTUREE is your direct, auditable supplier—not a middleman.
- Personalized Support: Your dedicated contact person is familiar with your drawings, materials, and deadlines.
- Capacity Buffer and Second Source: If your metalworking business experiences a surge in orders or a supplier drops out, FACTUREE can step in at short notice without the need for new supplier qualification.
- Cost-effective starting at a quantity of 1: Individual parts, small-batch production, and mass production at fair prices.
- Custom-made products based on drawings: FACTUREE manufactures custom metal products and replacement parts, even if the original manufacturer no longer supplies them.
- All procedures under one roof: Turned, milled, sheet metal, and welded parts with surface finishes, all in a single order, with standardized inspection reports.
- Protection of Know-How and Quality Assurance: Greater precision, comprehensive quality assurance, in-depth expertise, and data protection in accordance with ISO 27001 standards.
Applications for Metalworking
Typical Metal Components for Metal Fabrication and Steel Construction
FACTUREE manufactures metal components for metal fabrication, steel construction, and mechanical and plant engineering. Here you will find a selection of typical components.
Sheet Metal and Laser-Cut Parts
- Gusset plates, base plates, and connecting plates
- Brackets, Consoles, and Mounts
- Sheet-metal panels, covers, and enclosures
- Folded Profiles and Angles
Steel Structure Components and Welded Assemblies
- Frames, Racks, and Substructures
- Support Connections and Mounting Plates
- Railing and Stair Components
- Tube assemblies made from 2D and 3D laser-cut tube parts
Turned and Milled Parts
- Flanges, Bushings, and Spacers
- Shafts, Bolts, and Special Screws
- Adapter plates and fixture components
- Replacement and Wear Parts According to Drawings
Large Parts and Custom-Made Products
- Machine frames and large welded structures
- Base plates and large-format sheet metal parts
- Custom-Made Metal Products
Further services
Metalworking Manufacturing Processes at FACTUREE
Anyone who has metal machined needs the right process for each component. FACTUREE brings together all common metal fabrication processes in a single network and combines state-of-the-art machinery to produce parts based on your drawings. Metal machining includes tolerances as tight as 0.01 mm and complex geometries.
Materials
Materials for Metalworking
FACTUREE processes over 300 materials and selects each one based on the function of your metal component. Whether it’s strength, weldability, machinability, or corrosion resistance, the team understands the requirements. Here you’ll find a selection of metals.
Frequently requested materials
Structural steel and heat-treated steel
Steel is the most important material used in metalworking. Structural steels are suitable for welded structures, brackets, and frames, while heat-treated steels are suitable for high-load shafts and bolts.
- S235JR (1.0038), S355J2 (1.0577)
- C45 (1.0503), 42CrMo4 (1.7225)
- and much more
Stainless steel
Stainless steel is used for corrosion-resistant and visible components, such as railings, covers, or parts for food processing equipment.
- 1.4301 (304), 1.4305 (303)
- 1.4404 (316L), 1.4571 (316Ti)
- and much more.
Aluminum alloys
Aluminum is lightweight, easy to machine, and can be anodized. It is suitable for base plates, housings, and moving parts.
- EN AW-5083, EN AW-6082, EN AW-7075
- and much more.
Copper, Brass, and Bronze
Copper conducts electricity and heat (high electrical conductivity). Brass and bronze, on the other hand, have good sliding properties and are suitable for bushings, bearings, and fitting components. Popular materials include steel, stainless steel, and aluminum.
- Cu-ETP (CW004A)
- Brass CuZn39Pb3 (CW614N)
- Bronze CuSn12
- and much more.
Surface treatments
Finishes for Your Metal Parts
Metal parts must withstand corrosion, wear, and the elements. FACTUREE selects the appropriate treatment for each material and application and delivers your components ready for installation—all from a single source.
Frequently requested surface treatments
Corrosion Protection
- Electrogalvanizing: Thin Protection for Small Parts and Fasteners
- Hot-dip galvanizing: durable protection for outdoor steel structural components
- Electroplating, metallic coatings for steel, copper, and brass
- Phosphating, Corrosion Protection, and Primer for Paints
- Blackening, protective coating without dimensional change
- Chemical nickel plating, uniform coating even on complex geometries
- Anodizing and Hard Anodizing: Corrosion and Wear Protection for Aluminum
Coatings and Painting
- Powder coating in RAL colors for frames, railings, and panels
- Wet painting for large parts and visible surfaces
- KTL (Cathodic Dip Coating) as a uniform primer for mass-produced parts
- Blasting as a Pretreatment or Finish
Hardening and Heat Treatment
- Case hardening, hard surface layer, and tough core for gears and shafts
- Induction hardening, selectively hardened functional surfaces
- Heat Treatment for Highly Stressed Components
- Nitriding and plasma nitriding: wear-resistant with minimal distortion
- Stress-relief annealing for dimensionally stable welded structures
Labeling
- Laser Marking for Serial Numbers and Data Matrix Codes
- Laser Engraving for Part Numbers and Markings
Your applications in safe hands
Quality Assurance in Contract Manufacturing of Metal Parts
In contract manufacturing of metal parts, every component must fit perfectly. This is because errors often don’t become apparent until assembly. FACTUREE provides contract manufacturing and custom manufacturing services in metalworking for metal fabricators, steel fabricators, and machinery and plant manufacturers. Our manufacturing partners possess the necessary certifications and many years of experience.
- Certifications: FACTUREE is certified to DIN EN ISO 9001 and ISO 14001. Its manufacturing partners hold industry-specific certifications.
- Traceability: Every component is traceable from the material batch through to delivery.
- References: Material certificates 3.1 in accordance with EN 10204, measurement reports, initial sample test reports, and declarations regarding RoHS and REACH.
- Manufacturing in Compliance with Standards: Exactly as per the drawing, including tolerances, fits, general tolerances in accordance with ISO 2768, and your specifications for packaging and labeling.
- Confidentiality: FACTUREE removes your name from all drawings and enters into NDAs with all manufacturing partners.
- Framework Agreements: For recurring needs and call-off orders, you can count on stable prices and dedicated contacts.
Contact person
Our Experts for Your Metalworking Needs
FACTUREE combines the speed of digital sourcing with the manufacturing expertise of in-house specialists. The team conducts a technical review of your drawings and, upon request, recommends the most cost-effective manufacturing process for various metals. This is how FACTUREE finds the right manufacturer for every metal part.
Our specialists understand the requirements of metalworking—from weld preparation and bend radii to tolerances, fits, and test certificates. We’re with you every step of the way, from the first prototype to mass production.
Billy Schulz
Head of Operations
schulz@facturee.de
Tel: +49(0) 30 629 3939-0
Antonio Scala
Team Lead
antonio.scala@facturee.de
Tel: +49(0) 30 629 3939-30
What our customers ask
Frequently Asked Questions About Metalworking
Can I use FACTUREE to have metal parts manufactured based on a drawing?
With FACTUREE, you can have metal parts manufactured according to technical drawings through a network of over 2,000 certified manufacturing partners.
We guarantee consistently high quality on every order. We provide turned, milled, sheet metal, welded, and cast parts with finished surfaces—all from a single source—whether as individual parts or in series production.
What is the difference between metal fabrication and metalworking?
FACTUREE defines metal fabrication as all processes used to transform metal into a finished component. Metalworking is a part of this. It refers to the precise machining of an existing workpiece. This is done, for example, through milling, turning, or grinding.
Are there any metalworking shops near me, even for small quantities?
FACTUREE works with manufacturing partners throughout Germany and Europe and delivers to your location anywhere in Germany. Instead of searching for a local metal fabrication shop yourself, simply submit a request. You can receive parts starting at just one piece.
Does FACTUREE offer contract manufacturing services in metalworking?
FACTUREE provides contract manufacturing services in metalworking for metal fabricators, steel fabricators, and machinery and plant manufacturers. This allows them to overcome capacity bottlenecks or utilize processes that are not available in their own facilities.
More than 2,000 certified manufacturing partners produce parts exactly according to your drawings—whether as individual parts, small batches, or mass-produced items—complete with 3.1 material certificates and measurement reports.
How much does contract manufacturing for metal parts cost?
FACTUREE calculates the price for each component individually based on your specific requirements. The price depends primarily on the material, process, geometry, tolerances, quantity, and surface finish. After you upload your drawing, you will receive a binding quote with a delivery date.
What metals does FACTUREE process?
FACTUREE processes, among other materials, structural steel, heat-treated steel, stainless steel, aluminum, copper, brass, and bronze—a total of over 300 materials. Always specify materials using their full standard designations.
Does FACTUREE also offer metal fabrication for high-volume production?
FACTUREE offers metal fabrication for high-volume production as well as for individual parts and small-batch production. For recurring needs, FACTUREE enters into framework agreements with call-off orders, stable prices, and dedicated contacts. Our manufacturing partners are equipped to handle high volumes and provide consistent inspection certificates. You can find more information under “Mass Production” and “Framework Agreements” at FACTUREE.
Does FACTUREE manufacture individual parts as well as production runs?
FACTUREE manufactures one-off items and prototypes as well as small batches and production runs based on call-off orders. For recurring needs, FACTUREE offers framework agreements with stable prices.
How soon will I receive my metal parts?
FACTUREE delivers metal parts within 9 to 12 days. However, the exact delivery time depends on other factors, including the manufacturing process, material, quantity, and surface finish.
Can FACTUREE serve as a second source for our purchasing?
FACTUREE serves as a flexible secondary source of supply for many metalworking companies. This allows them to continue production without delay in the event of supplier shortages or order spikes.
How does FACTUREE protect my design data?
FACTUREE removes all names from your drawings. We enter into NDAs with all manufacturing partners and customers and comply with ISO 27001 standards.